Can One Use Led Lights For Nails Painted With Regular Polish?
Download Article
Download Commodity
If y'all like the durability of a gel manicure but want the range of colors you can go with regular nail polish, you may take wondered if you can mix both types of polish together. Fortunately, if yous're careful and patient, you can! For a simple combined manicure, apply your regular polish and then add together a gel topcoat once information technology'due south dry out. For a trivial extra durability, make a "gelly sandwich" by layering regular polish between two gel coats.
-
ane
Apply your regular smoothen as yous normally would. Polish your nails with regular boom polish in the color of your choice. To help the smooth attach amend, buff and make clean your nails first. You can also prep your nails with a regular (not-gel) base coat if you wish.[1]
- For a more intense or opaque colour, add multiple layers of shine. Nevertheless, try not to brand them too thick, or the gel topcoat may non hold as well.
- Apply the polish up to the ends of your nails, just don't cap the free edge.
-
two
Allow your polish to dry completely. This is a crucial step to making the polish and gel combo piece of work! Before applying the gel topcoat, give your nail polish several hours to dry. Make sure the polish has dried completely before you continue.[two]
- Give the polish at least 4-6 hours to dry. Ideally, you lot should let it cure for a full 24 hours.
- You lot may need more than drying time if you've practical multiple layers of shine.
- If the smoothen doesn't dry out completely, the topcoat may peel off. The polish might also contraction or crack nether the gel topcoat afterwards y'all cure the gel.[three]
Advertisement
-
3
Castor on the gel topcoat. In one case your nails are dry, apply a layer of gel topcoat. Brush from the base of each smash to the tip.[4] Swipe a niggling topcoat on the free edge of the boom to cap it off.[5]
- If you become whatever gel on your pare or cuticle, wipe it off before you cure the gel. Otherwise, it will be very hard to take off!
-
four
Cure the topcoat under an LED or UV lamp. Place your hand in an LED or UV nail curing lamp to dry the gel. Exit your nails under the lamp for the recommended amount of time.[half dozen]
- Look at the label on your topcoat to decide the correct curing time. Typically, you volition need to cure for thirty seconds under an LED lamp, or 2 minutes nether a UV lamp.[8]
- You tin can buy a gel nail drying lamp online, in a section store, or from a dazzler supply store.
Alert: Using UV or LED curing lamps can betrayal your skin to high levels of UV radiation, leading to skin impairment over fourth dimension. If you get frequent gel manicures, protect your easily with a layer of broad-spectrum sunscreen or a pair of protective UV-shielding manicure gloves.[7]
-
five
Wipe away the tacky layer with an alcohol wipe. After yous cure the gel topcoat, in that location volition be a sticky layer on top of your nails. To remove this layer, pour some 91% isopropyl booze onto a lint-complimentary wipe and wipe each nail. If you prefer, yous tin can also use disposable alcohol wipes.[nine]
- Avert using cotton balls, since these can leave lint on your nails.
- If possible, use a divide wipe for each nail. Using the same wipe on multiple nails can dull your topcoat.
- If your cuticles experience dry, give the alcohol ane-two minutes to dry and so wipe on a little cuticle oil.[10]
Advertizement
-
1
Vitrify your nails to remove any shine. Earlier you apply the gel base coat, you'll demand to slightly roughen the surface of your nails. This will allow the gel to adhere better. Gently go over your blast with a buffer or file with a grit of 220 or college.[11] Swipe the buffer over each nail half-dozen to 8 times in an X shape, using smooth strokes.[12]
- Have care non to over-buff your nails, since this tin cause damage.
- If yous choose to vitrify your nails with a file rather than a buffing block, use 1 with a very fine grit. Swipe it very lightly over your smash in just a few strokes. Otherwise, you lot may impairment your nails.
-
2
Use an booze wipe to make clean off the dust. Wipe your buffed nails clean with a lint-free wipe soaked in 91% isopropyl alcohol. This will both make clean your nails and dehydrate them slightly, which will allow the gel foundation to adhere better.[13]
- If yous prefer, you tin can use disposable alcohol wipes, like the kind y'all'd find in a first aid kit.
- Don't employ a cotton ball, since this might leave fibers behind on your nails.
-
three
Brush on a layer of gel polish foundation. Utilise a thin coat of gel polish foundation to each nail, brushing from base to tip. This will human activity as the base glaze for your manicure. After brushing the foundation over your boom, swipe a little along the free edge of your nail to cap the tip.[14]
- Accept care not to become the gel on your cuticle, since this will cause the base of operations coat to pare off more easily.[15]
-
4
Cure the foundation under an LED or UV lamp. Cure your nails under an LED or UV drying lamp for the recommended amount of time. Typically, this will have xxx seconds under an LED lamp, or 1 minute nether a UV lamp.[xvi]
- If you're concerned about UV exposure, protect your hands with a layer of sunscreen or protective manicure gloves.
-
5
Wipe the surface of each nail with alcohol to remove the tacky layer. One time your foundation coat is cured, at that place will be a sticky "inhibition layer" on your nails. To accept it off, wipe each of your nails with a lint-free wipe soaked in 91% isopropyl alcohol.[17]
- You tin can likewise utilize disposable alcohol wipes for this.
-
6
Employ 1 or 2 sparse coats of regular smash polish. Take the regular shine of your choice and wipe the brush on the edge of the bottle to remove any excess polish. Employ an fifty-fifty, thin layer of the shine to each nail. Give information technology five minutes to dry out, then brush on a second coat if you wish.[eighteen]
- If yous make the polish too thick, the gel topcoat won't adhere properly.
- Take the polish up to the edge of your nails, but don't cap off the tips. This will help prevent chipping.[19]
-
7
Allow the shine to dry out completely. To go on the shine from wrinkling or bang-up underneath the gel topcoat, you must give the regular polish time to dry out. Ideally, you should look several hours or even a full mean solar day earlier adding the topcoat.[twenty]
- If you're using a quick-drying polish, you may be able to get away with applying the topcoat afterwards 15-20 minutes.[21]
-
8
Add together a layer of gel topcoat. Once you're certain the polish is completely dry, castor on your gel topcoat. Apply it in an even layer, fugitive your cuticle, and then cap off the tip of your nail.[22]
- Capping off the edge of your nail will help seal in the regular polish and prevent chipping.
-
9
Cure the topcoat under the lamp for the recommended fourth dimension. Place your nails inside your LED or UV nail lamp to cure the topcoat. Check the label on the bottle to decide how long you need to cure your nails.[23]
- Typically, this will take 30 seconds under an LED lamp, and two minutes under a UV lamp.
-
10
Wipe off the tacky layer with an booze wipe. When you're done, wipe off the tacky layer with 91% isopropyl alcohol on a lint-free wipe. You should now take a beautiful and durable gelly sandwich manicure![24]
- Add together a little cuticle oil for extra wet if yous want. Look at least a minute after removing the tacky layer so y'all don't dull your topcoat.[25]
Advertisement
Add together New Question
-
Question
How does the gel top glaze bond to the regular nail polish, given that surfaces need to be tacky or non shiny for the gel to adhere properly?
This answer was written by ane of our trained squad of researchers who validated information technology for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Answer
-
Question
How exercise I apply regular nail polish to boom gel without it peeling off?
This answer was written by 1 of our trained team of researchers who validated it for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Answer
If y'all desire to combine regular nail polish with gel, it's all-time to seal in the shine with a gel topcoat rather than putting the shine on top of the gel. You tin can either utilize a layer of smooth with a topcoat over it, or apply a gel basecoat, layer on the polish, and seal it all in with a gel topcoat.
-
Question
Tin can I add together a layer of colour when I take cured the top coat?
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Respond
-
Question
Can you employ a gel nail polish and gel superlative coat without UV?
This respond was written by one of our trained team of researchers who validated information technology for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Reply
-
Question
When using a gel base glaze, do you have to remove the tacky inhibition layer earlier putting regular nail polish on? Can y'all paint RNP over the tacky layer of the gel base coat that has been cured?
This answer was written past one of our trained squad of researchers who validated information technology for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Answer
-
Question
Every one time in a while, when I accept the tacky off with alcohol, I discover a dull finish. What causes it?
This answer was written past one of our trained squad of researchers who validated it for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Answer
-
Question
Would a gel base coat offering more durability? Also, tin regular smoothen be cured nether my UV lamp?
Cecilia Flores
Tiptop Answerer
Only gel polish can be cured under a UV lamp. Regular polish dries on its own, while gel polish requires a lamp and won't cure unless it's sat under the lamp. Employ a gel base of operations coat, cure it, apply regular polish and wait for it to dry completely, then use a gel peak coat and cure it. This helps the mani to concluding longer and you won't have to buy a gel color.
-
Question
Will using a gel base of operations instead of regular base work improve?
In my feel, yep, a gel base is better.
-
Question
How practice I know which type of UV lite I have?
Look at the instructions for the unit you have. UV light volition crave a minute and a half to two minutes to cure, whereas a LED low-cal unit volition have most thirty seconds.
-
Question
Can I apply these gel polishes without exposing my nails in UV lamps?
They have gel polish with which you don't need to use the UV lamp.
Prove more than answers
Ask a Question
200 characters left
Include your email accost to go a message when this question is answered.
Submit
Ad
Video
Things You'll Need
- Nail buffer
- Lint-free cosmetic wipes
- 91% isopropyl booze
- Gel foundation
- Regular boom polish
- Gel topcoat
- UV or LED curing lamp
-
Before applying any nail polish, trim and file your nails to the desired length and shape. If you endeavour to shape your nails afterwards applying the polish, y'all'll impairment your manicure.
Thanks for submitting a tip for review!
Advertisement
About This Commodity
Cheers to all authors for creating a page that has been read 478,653 times.
Did this article help you?
Source: https://www.wikihow.com/Use-Both-Regular-and-UV-Gel-Nail-Polish-Together
Posted by: morrismoseent.blogspot.com
0 Response to "Can One Use Led Lights For Nails Painted With Regular Polish?"
Post a Comment